HIGH PRECISION FRAME
Low Noise No Heat
HIGH TOUGHNESS SPRING
MUITIPLE EFFECTS EASY TO ACHIEVE
ASSEMBLE THE BARREL
Set these to the preferable length, and tighten the 2 screws on the grip. On average, the needle
shouldn't exceed the tip more than 2 mm and no less than 1 mm
SET UP THE NEEDLE
and sizes of needles. Install one of the needles by inserting it through the tube towards the tip.
Be careful not to dull a needle while assembling. This could lead to a painful tattoo.
SECURE THE NIPPLE
nipple on the armature bar pin. Fasten the needle’s round open end onto the nipple.
ADJUST THE NEEDLE
exposed. You can adjust the needle’s exposure by adjusting the tube vise. The tube vise is the
adjustable screw in between the armature and needle.